sfgrooppvtltd@gmail.com - GST NO. : 27ADCPW4863C1ZE
- Send Email
Steel Scrap
Leading Exporters, Wholesaler, Retailer, Trader and Distributor of 201 Stainless Steel Scrap, 202 Stainless Steel Scrap, 304 Stainless Steel Scrap, 304L Stainless Steel Scrap, 310 Stainless Steel Scrap, 316 Stainless Steel Scrap, 316L Stainless Steel Scrap, 410 Stainless Steel Scrap, 430 Stainless Steel Scrap, Stainless Steel Turning Scrap, Mild Steel Scrap, Heavy Melting Steel Scrap and Structural Steel Scrap from Jalna.
| Business Type | Supplier, Trader |
| Grade | SS 201 (low-nickel Stainless Steel Grade) |
| Chromium Content | Approximately 16%–18% |
| Nickel Content | Approximately 3.5%–5.5% |
| Manganese Content | Higher Manganese Content To Substitute Nickel |
| Physical Form | Sheets, Pipes, Coils, Cuttings, Fabrication Waste, And Mixed Scrap |
| Surface Condition | May Be Polished, Oxidized, Painted, Or Lightly Rusted |
| Magnetic Property | Generally Non-magnetic (may Become Slightly Magnetic After Processing) |
| Density | Approximately 7.8 G/cm³ |
| Corrosion Resistance | Moderate Resistance (lower Than 304 Grade) |
| Weldability | Good, But Requires Proper Welding Techniques |
| Business Type | Supplier, Trader |
| Material | Stainless Steel |
| Grade | SS 202 (low-nickel Stainless Steel Grade) |
| Chromium Content | Approximately 17%–19% |
| Nickel Content | Approximately 4%–6% |
| Manganese Content | Higher Manganese Content To Partially Replace Nickel |
| Physical Form | Sheets, Pipes, Coils, Cuttings, Fabrication Waste, And Mixed Scrap |
| Surface Condition | May Be Polished, Oxidized, Painted, Or Lightly Rusted |
| Magnetic Property | Generally Non-magnetic (may Become Slightly Magnetic After Cold Working) |
| Density | Approximately 7.8 G/cm³ |
| Corrosion Resistance | Moderate Corrosion Resistance (lower Than 304 Grade) |
| Weldability | Good Weldability With Proper Procedures |
| Recyclability | Fully Recyclable Stainless Steel Scrap |
| Business Type | Supplier, Trader |
| Material | Stainless Steel |
| Grade | SS 304 (most Widely Used Stainless Steel Grade) |
| Chromium Content | Approximately 18%–20% |
| Nickel Content | Approximately 8%–10.5% |
| Physical Form | Sheets, Pipes, Coils, Fabrication Waste, Cuttings, And Mixed Scrap |
| Surface Condition | Polished, Brushed, Oxidized, Or Lightly Rusted Depending On Usage |
| Density | Approximately 7.9 G/cm³ |
| Weldability | Excellent Weldability |
| Recyclability | 100% Recyclable Stainless Steel Scrap |
| Business Type | Supplier, Trader |
| Material | Stainless Steel |
| Grade | SS 304L (low Carbon Version Of 304 Stainless Steel) |
| Chromium Content | Approximately 18%–20% |
| Nickel Content | Approximately 8%–12% |
| Carbon Content | Low Carbon (≤ 0.03%) |
| Physical Form | Sheets, Pipes, Coils, Fabrication Scrap, Cuttings, And Mixed Scrap |
| Surface Condition | Polished, Brushed, Oxidized, Or Lightly Rusted Depending On Use |
| Magnetic Property | Generally Non-magnetic (may Show Slight Magnetism After Cold Working) |
| Density | Approximately 7.9 G/cm³ |
| Weldability | Excellent Weldability With Minimal Carbide Precipitation Risk |
| Recyclability | Fully Recyclable Stainless Steel Scrap |
| Business Type | Supplier, Trader |
| Material | Stainless Stee |
| Grade | SS 310 (heat-resistant Stainless Steel Grade) |
| Chromium Content | Approximately 24%–26% |
| Nickel Content | Approximately 19%–22% |
| Carbon Content | Typically ≤ 0.25% (varies By Sub-grade 310 / 310S) |
| Physical Form | Sheets, Pipes, Coils, Fabrication Scrap, Cuttings, And Mixed Scrap |
| Magnetic Property | Generally Non-magnetic (may Become Slightly Magnetic After Cold Working) |
| Density | Approximately 7.9–8.0 G/cm³ |
| Weldability | Good Weldability With Proper Procedures |
| Recyclability | 100% Recyclable Stainless Steel Scrap |
| Business Type | Supplier, Trader |
| Material | Stainless Steel |
| Grade | SS 316 (marine-grade Stainless Steel) |
| Chromium Content | Approximately 16%–18% |
| Nickel Content | Approximately 10%–14% |
| Molybdenum Content | Approximately 2%–3% |
| Physical Form | Sheets, Pipes, Coils, Cuttings, Fabrication Waste, And Mixed Scrap |
| Density | Approximately 7.98 G/cm³ |
| Weldability | Excellent Weldability With Proper Techniques |
| Recyclability | 100% Recyclable Stainless Steel Scrap |
| Business Type | Supplier, Trader |
| Material | Low-carbon Austenitic Stainless Steel With Chromium, Nickel, And Molybdenum |
| Grade | SS 316L (low Carbon Version Of 316 Stainless Steel) |
| Chromium Content | Approximately 16%–18% |
| Nickel Content | Approximately 10%–14% |
| Molybdenum Content | Approximately 2%–3% |
| Carbon Content | Low Carbon (≤ 0.03%) |
| Physical Form | Sheets, Pipes, Coils, Fabrication Waste, Cuttings, And Mixed Scrap |
| Density | Approximately 7.98 G/cm³ |
| Weldability | Excellent Weldability With Minimal Carbide Precipitation Risk |
| Recyclability | Fully Recyclable Stainless Steel Scrap |
| Business Type | Supplier, Trader |
| Material | Stainless Steel |
| Grade | SS 410 (hardenable Stainless Steel) |
| Chromium Content | Approximately 11.5%–13.5% |
| Nickel Content | Very Low Or Nil |
| Carbon Content | Approximately Up To 0.15% |
| Physical Form | Sheets, Plates, Pipes, Cuttings, Machining Scrap, And Mixed Scrap |
| Magnetic Property | Magnetic (strongly Ferromagnetic) |
| Density | Approximately 7.75–7.85 G/cm³ |
| Weldability | Fair; Requires Proper Preheating And Post-weld Treatment |
| Recyclability | Fully Recyclable Stainless Steel Scrap |
| Business Type | Supplier, Trader |
| Material | Stainless Steel |
| Grade | SS 430 (ferritic Stainless Steel Grade) |
| Chromium Content | Approximately 16%–18% |
| Nickel Content | Very Low Or Nil |
| Carbon Content | Low Carbon Content (typically ≤ 0.12%) |
| Surface Condition | Polished, Brushed, Oxidized, Or Lightly Rusted Depending On Usage |
| Density | Approximately 7.7–7.8 G/cm³ |
| Weldability | Fair To Good (requires Proper Techniques) |
| Recyclability | Fully Recyclable Stainless Steel Scrap |
| Business Type | Supplier, Trader |
| Material | Stainless Steel |
| Country of Origin | India |
| Common Grades | 201, 202, 304, 304L, 316, 316L, 410, 430 (depending On Machining Source) |
| Physical Form | Fine Curled Chips, Swarf, Or Machining Turnings |
| Source | CNC Machining, Lathe Operations, Drilling And Milling Processes |
| Density | Lower Bulk Density Due To Loose Chip Structure |
| Magnetic Property | Varies By Grade (austenitic Grades Non-magnetic; Ferritic/martensitic Magnetic) |
| Corrosion Resistance | High Base Resistance, But May Degrade Due To Contamination |
| Impurity Level | Possible Contamination With Oil, Moisture, And Non-metallic Particles |
| Processing Type | Collection, Drying, De-oiling, And Briquetting For Recycling |
| Business Type | Supplier, Trader |
| Country of Origin | India |
| Material Composition | Low-carbon Steel With Excellent Recyclability |
| Carbon Content | Typically Up To 0.25% Carbon |
| Material Grade | Industrial-grade Recyclable Mild Steel |
| Physical Form | Sheets, Plates, Cuttings, Turnings, Structural Sections, And Offcuts |
| Density | Approximately 7.85 G/cm³ |
| Surface Condition | Clean, Painted, Coated, Or Lightly Rusted Condition |
| Magnetic Property | Strongly Magnetic |
| Corrosion Resistance | Moderate Resistance; May Develop Surface Rust Over Time |
| Processing Type | Sorted, Sheared, Shredded, Or Baled For Recycling |
| Recyclability | Fully Recyclable Without Significant Loss Of Properties |
| Melting Suitability | Suitable For Steel Remelting And Secondary Steel Production |
| Industrial Applications | Steel Manufacturing, Foundries, Fabrication Units, And Recycling Industries |
| Business Type | Supplier, Trader |
| Country of Origin | India |
| Density | High-density Recyclable Steel Material |
| Composition | Carbon Steel And Mild Steel Scrap Materials |
| Physical Form | Cut, Shredded, Baled, Or Loose Scrap Pieces |
| Thickness Range | Typically 3 Mm And Above |
| Surface Condition | May Contain Light Rust, Paint, Or Coatings |
| Magnetic Property | Strongly Magnetic |
| Contamination Level | Processed To Minimize Non-metallic Impurities |
| Recyclability | 100% Recyclable And Reusable In Steel Production |
| Processing Method | Sorted, Sheared, Cleaned, And Prepared For Melting |
| Melting Suitability | Ideal For Furnace Charging And Steel Remelting Operations |
| Industrial Usage | Steel Mills, Foundries, Rolling Mills, And Metal Recycling Facilities |
| Business Type | Supplier, Trader |
| Physical Form | Beams, Channels, Angles, Plates, Pipes, Rods, Demolition Scrap |
| Material Composition | Low-carbon Steel With Possible Alloying Elements |
| Carbon Content | Up To 0.25% |
| Density | Approx. 7.85 G/cm³ |
| Surface Condition | May Include Rust, Paint, Coatings, Concrete Residue |
| Magnetic Property | Strongly Magnetic |
| Tensile Strength | Moderate To High Depending On Grade |
| Ductility | Good Ductility In Mild Grades |
| Weldability | Excellent Weldability |
| Recyclability | 100% Recyclable Ferrous Material |
